AMPERFIED WALLBOX connect.home

Smart charging and loading

Buy now on Amazon

An intelligent wallbox that you can control conveniently with your smartphone

Sounds good, don’t you think? Our AMPERFIED Wallbox connect.home communicates with the myAMPERFIED app. After you have downloaded this from the app store, you’re ready to go, and you decide when and how to charge. You see your current data and the entire charging consumption in real time. You can also authorise other users and assign them directly to the wallbox. The clever way of charging.

Intelligent charging technology

FOR ELECTRIC CARS

App for controlling and diagnosing the wallbox
Authorisation directly on the charging station via RFID
Simple installation by an electrician
Maintenance-free, so no add-on costs
Connection to a home energy management system (HEMS)
Suitable for carports, garages and outdoors

Technical highlights of the AMPERFIED Wallbox connect.home

  • Authorisation via RFID (Mifare Desfire EV1).
  • WLAN and LAN connection integrated.
  • App for controlling and diagnosing the wallbox.
  • Additional configuration, control and diagnosis via web interface.
  • Connection to Home Energy Management System (HEMS).
  • Parking stand for charging plug on the attached vehicle line.
  • Flexible cable routing from below, behind or above.
  • Charging cable connection: Type 2.
  • Charging capacity (adjustable): e.g. 1.4 kW/3.7 kW/7.2 kW/11 kW.

FROM 975 €

RRP incl. VAT

Buy now on Amazon

AMPERFIED WALLBOX connect.home

YOUR BENEFITS

More efficiency in the charging process

Using the app you can easily and conveniently control when and how your electric or hybrid vehicle should be charged. The charging process can be started or ended directly, and the charging capacity can also be reduced or increased at any time.

Charging data always in view

If the app is connected with the Wallbox connect.home, you can check how much electricity is flowing into your electric or hybrid vehicle. You can also activate and remove multiple users very easily.

Simple, inexpensive installation

Installation is handled by an electrician or an installation service. Thanks to the integrated DC residual current detection, installation costs are reduced to a minimum. The wallbox is intuitive to use, maintenance-free and suitable for all vehicles with a standard Type 2 charging socket.

Charging technology made in Germany

The brand HEIDELBERG has stood for quality and sustainability in the global printing industry for more than 170 years. But we are also making an impression in the field of electric mobility with innovative, customer-oriented solutions. We have now given our activities in this area, which we have been engaged in since 2014, a name – HEIDELBERG AMPERFIED. The wholly owned subsidiary founded in April 2022 stands for smart charging technology made in Germany, and aspires to being a trustworthy and reliable partner on the way to the future of electric mobility.

TECHNICAL SPECIFICATIONS

OF THE WALLBOX connect.home

RegulationsEN 61851-1:2019
EN 61439-7
Charging capacity Mode 3up to 11 kW
Number of charging points1
Rated voltage230 V – 400 V
Rated currentup to 16 A, adjustable from 6 A to 16 A in 2 A increments
Rated frequency50 Hz
Charging mode1-, 2- or 3-phase
Network typesTT/TN
Connection technologySpring clamp technology
Cable entrySurface or flush-mounted/9 to 17 mm
Connection cross section1 mm² to 10 mm² – Single-wire conductor (rigid)
1 mm² to 10 mm² – Finely stranded conductor (flexible)
1 mm² to 6 mm² – Finely stranded conductor with wire end ferrule (flexible)
The relevant national installation regulations must be observed.
Charging connector/couplerType 2
Charging cable length5.0 m or 7.5 m
DisplayStatus LED on the front
Authorisation and releaseRFID, app, Modbus, release input
Data interfacesRS485 / LAN / WLAN
WLANf = 2400 Mhz…
Communication protocolsModbus TCP
Appyes
Load managementyes, as a follower
Home Energy Managementyes, via Modbus
Protection ratingIP54
Residual current detection6mA DC disconnection in accordance with IEC 62955-1, therefore an RCD TYPE A 30mA can be connected in series according to VDE 0100-722 or HD 60364-7-722
Protection against mechanical impactIK08
Operating temperature range (°C)-25°C to +40°C
Temperature behaviourThe charging current is made available permanently within the operating temperature range. If the temperature is exceeded, the charging process is interrupted. The charging process than restarts automatically following a cooling period.
Storage temperature range (°C)-25°C to +80°C
Permissible relative humidity (%)5% to 95%
Altitude (m)Max. 2000 metres above sea level
Protection classI
Overvoltage categoryIII
Dimensions (W × H × D) (mm)462 mm x 345 mm x 142 mm
WeightApprox. 6.3 kg
AttachmentWall mounting or stele
Delivery contentsWallbox, operating instructions, RFID cards

PROVEN 1000 TIMES OVER. AVAILABLE ALMOST ANYWHERE

Around the world, for many years large auto brands and electrical companies have put their trust in the performance of our charging technologies. You can also rely on us!

STAY UP TO DATE

Do you want the latest information about electric mobility and charging technologies? Then subscribe to our HEIDELBERG AMPERFIED Newsletter now. Of course it’s free, and if you’re not interested anymore, it takes just one click to unsubscribe.

Register now